Axis ENRelay Output Module

The Axis Relay Output Module is a loop-powered device which incorporates a dual form C, volt-free relay output.

It is mounted on a plastic fascia plate for use with a 4" square or 2 gang electrical box (minimum depth 2 1/8”). A red LED flashes in synchronization with the current pulse reply from the device.

If output bit 2 is set, the LED is illuminated continuously. Note: the Axis Relay Output Module is not designed for outdoor use unless it is mounted in a suitable weatherproof enclosure.

An integral eight position programming DIP switch must be set for device addressing and wiring classification definition.

Key Features

  • Cost effective against ancillary hardware
  • Simple to install
  • Single poll volt-free change over
  • Compact in size
  • SLP-Loop powered
  • 4
TypeRelay Output Module
StyleFascia plate with wirning terminals
Temperature range32˚F to 120˚F (0˚C to 49˚C)
Humidity10 to 93% RH (non-condensing)
Signal Line Circuit (SLC)Supervised
Working Voltage17-28VDC Modulation Voltage 9-5V (peak to peak) Supervisory Current 0.85mA Surge Current 2.5mA Maximum Alarm Current 3.5mA (LED on)
Max Line impedance50Ω max
Functional StatesAnalog value (Normal) 16
Relay outputNon Supervised, dry Contact; 24VDC, 2A; 30VAC, 0.5A
Dimensions H x W x D inches4½” x 4½” x 1
Approvals / CertificationUL Listed (UL864)

Order Codes and Options

55000-863AEL: Relay Output Module