Wall Mounting Single Relay Output Module

The Axis single channel output modules are loop powered, designed around a fully digital protocol and provides form C changeover contacts for control of auxiliary devices such as fire shutters.

The output channel is a normally de-energised relay switched on by a command from the control panel.

The unit provides a fast and secure response, and incorporates a bidirectional short circuit isolator.

Connections are made using plug-in terminal blocks which will accept conductors up to 2.5mm².

The unit is supplied fixed to a plate which is suitable for wall mounting with a choice of standard 25mm or deep 47mm mounting boxes available.

Key Features

  • Short circuit isolators in each device to the requirements of EN54-17
  • Auto addressing capability (by the control panel) or manually using a hand held programmer.
  • Digital checking of double address
  • Line quality information
  • Bicolour (red green) LED driven by the control panel
Specification
Power Supply15-40 V
Average Current ConsumptionI=120 uA
LED Current ConsumptionIled=6mA @24Vdc
Operating Temperature Range-30°C / +70°C
Humidity (non condensing)95% RH
Relay Switching CharacteristicI=2A V=30Vdc
Dimensions H x W x D mm85 x 85 x 30
Weight grams200
IP Rating21C

Order Codes and Options

20-VMC120-ADV: Wall Mounting Single Relay Output Module