Axis En LogoAV Photoelectric Smoke Detector

Axis analogue detectors are designed around a fully digital protocol.

The analogue addressable photoelectric smoke detector has been designed with a unique symmetrical chamber.

The chamber ensures optimum air entry from all directions and offers immunity to ambient light into the detectors.

A double dust trap protects the smoke chamber from airborne contamination and external light.

A special dust compensation algorithm reduces maintenance periods.

Continuous screen provides a high level of protection from small insects.

Soft and safe addressing allowing accurate configuration of system installation.

The unit provides a fast and secure response, and incorporates a bidirectional short circuit isolator. 

A unique range of Decorline finishes are available.

Key Features

  • High reliability and error detection
  • Short circuit isolators in each device to the requirements of EN54-17
  • Large capacity, up to 240 devices per loop
  • Auto addressing capability (by the control panel) or manually using a handheld mprogrammer
  • Digital checking of double address
  • Line quality information
  • Built-in diagnostics, hardware/software drift compensation
  • Day / night operation
  • 4 selectable alarm thresholds
  • 360° visible bicolour (red green) LED driven by the control panel
Power Supply15-40 V
Average Current ConsumptionI=70 uA
Output driver currentIout=6mA @24Vdc
LED current consumptionIled=6mA @24Vdc
Operating Temperature Range-30°C / +70°C
Humidity (non condensing)95% RH
Dimensions H x D mm54 x 110
IP Rating42 with WP100 silicon protection, 40 without

Order Codes and Options

20-V100-ADV: Photoelectric Smoke Detector