Axis En LogoAV Multicriteria Detector

Axis EN analogue detectors are designed around a fully digital protocol. The analogue addressable multicriteria detector combines a photoelectric and thermal sensing element with a very sophisticated algorithm.

A symmetrical smoke chamber ensures optimal smoke sensitivity from all directions. The double dust trap protects the smoke chamber from airborne contamination and external light. A special dust compensation algorithm reduces maintenance periods.

A single, centrally positioned, thermistor supervises ambient temperature with low thermal inertia.

The detector efficiently analyses the status of the protected area guaranteeing a high rejection to false and unwanted alarms.

Continuous screen provides a high level of protection from small insects.

The unit provides a fast and secure response. 

A Unique range of Decorline finishes are available

Key Features

  • Provides high reliability and error detection
  • Short circuit isolators in each device to the requirements of EN54-17
  • Large capacity, up to 240 devices per loop
  • Auto addressing capability (by the control panel) or manually using a hand held programmer
  • Digital checking of double address
  • Line quality information
  • Bicolour (red green) LED driven by the control panel
Specification
Power Supply15-40 V
Average Current ConsumptionI=70 uA
Output driver currentIout=6mA @24Vdc
LED current consumptionIled=6mA @24Vdc
Operating Temperature Range-30°C / +70°C
Humidity (non condensing) 95% RH95% RH
Dimensions H x D mm110 x 54
IP Rating42 with WP100 silicon protection, 40 without

Order Codes and Options

20-V200-ADV: Multicriteria Detector