Intelligent Multicriteria Detector

The Axis-OHX intelligent Multicriteria Detector is a point detection device that continuously samples both the air and the temperature variation in the protected area to provide the earliest warning of a fire condition.

Special algorithms utilise information from both the smoke and heat sensing elements to ensure high level of false alarm rejection without compromising genuine alarm sensing performance.

This detector is characterised by an aesthetically pleasing low profile and is specifically designed for Axis EN control panels.

Features

  • Nine modes of operation
  • Bi-directional isolator to protect against cable faults
  • Utilises Axis EN protocol with high noise rejection
  • Dual bi-colour LEDs providing 360° cone of visibility
  • Dust Restrict Chamber (DRC) technology offering advanced immunity to airborne contaminants
  • Open style mounting base offers easy wiring and low pressure locking
  • Addressing and sensitivity settings using the Device Programming Tool or Auto addressing capability via the fire control panel
  • Magnet test capability

Standards & Approvals

  • EN 54-5: + A2: Heat Detectors 
  • EN 54-7: Smoke Detectors 
  • EN 54-17: Short Circuit Isolators
  • CEA 4021: Multisensor Detectors

Specification

Loop Voltage(*) 18-40 Vdc
Average Standby Current 85 μA @ 24Vdc
Remote Output Max Current 20 mA
Max number of loop addresses 240
Operating Temperature Range -10°C / +55°C
Humidity (non condensing) 95% RH
Dimensions H x D 58 x 100 mm
IP Rating IP40 (IP42 with silicon base gasket)
Weight (Standard Base included) 130 g

(*) Product operates down to 15 V, but without LED indication.

 

Order Codes and Options

Axis-OHX Intelligent Multicriteria Detector
Axis-MB Base
Axis-SAMB Slave Sounder Base
Axis-SVAMB Slave Sounder Beacon Base
Axis-SMB Intelligent Sounder Base
Axis-SVMB Intelligent Sounder Beacon Base
Axis-WP Silcon Base Gasket